Finish your bathroom panels properly with 2.4m PVC wall panel trims designed for our 10mm panels. Choose internal corners, external corners, end caps, L trims and H trims for clean edges, protected corners and a professional finish around bathroom wall panels and shower panels.
Choose the edge or corner you need to finish. Each trim below is 2.4m long and designed for our 10mm PVC bathroom wall panels.
For a neat finish where two walls meet.
View trim →
For exposed outside corners.
View trim →
Finishes a visible cut panel edge.
View trim →
For neat finishing and edge details.
View trim →
Joins two cut panels where required.
View trim →Do you need an H trim? Full panels already connect with tongue and groove, so an H trim is normally only needed where two cut panel edges must be joined.
Choose the profile you need, then select your preferred finish on the product page.
Choose a trim to see how it fits around our 10mm PVC bathroom wall panels.
For a neat inside corner. Each panel slots into its own side of the trim, leaving a slim finished strip where the two panelled walls meet.
Both 10mm panels are received by the trim at the corner.
Choose the profile you need below, then select your preferred finish on the product page.
Every panel installation needs the right trim to finish it properly. Our high-quality PVC wall panel trims are designed around our 10mm bathroom wall panels, helping corners, exposed edges and cut joins look clean and deliberate. Use the correct trim profile for the location, then seal wet-area joints correctly with a suitable sanitary sealant.
Our PVC panel trims are suited to bathroom and shower installations where moisture resistance matters. Use them as bathroom cladding trims and trims for shower panels to finish corners and exposed edges, then seal the installation correctly where required.
Current trim options include Chrome, Black, White, Beige and Grey, giving you a choice of subtle or contrasting finishes. If you are still choosing your wall panels, use the Sample Hub to compare panel colours and designs first.
Buy bathroom panel trims, bathroom wall panel trims and fitting products in one place. Free Premium Rapid Delivery applies on qualifying orders over £150, with free local delivery within 28 miles of TQ12. You can also visit our Devon showroom or contact the team for help.
Measure corners and exposed edges first, cut each 2.4m trim to suit, and fit the required profiles as the panels go up. Seal joints and wet areas with a suitable sanitary sealant.
Pair your PVC wall panel trims with our recommended adhesive, sanitary silicone and installation accessories for a clean, properly sealed finish.
It depends on the edges and corners in your room. Internal corners are for inside wall junctions, external corners for outside corners, end caps for exposed panel edges, L trims for finishing details and H trims for joining two cut panel edges where needed.
Use trims designed for 10mm panels. Every trim in this collection is made to fit our 10mm PVC bathroom wall panels and is supplied in a 2.4m length.
An internal corner trim creates a clean finish where two panelled walls meet at an inside corner.
An external corner trim finishes and protects an exposed outside corner where panelled surfaces meet.
Use an end cap where a panel finishes with a visible cut edge, such as at the end of a panel run or beside an opening.
Usually not between full-width panels because the panels already join using tongue and groove. An H trim is useful where two cut panel edges need to be joined.
Yes. Measure carefully and cut the 2.4m trim to suit your installation using a suitable cutting tool for PVC.
No. Trims improve the finish and help protect edges, but joints and wet areas still need to be sealed correctly with a suitable sanitary silicone or sealant.
